This place is amazing. Got our manual in a few hours. Print quality is excellent. Even the manufacturer didn't have this manual. The price was excellent. How many more stars can I give them? More than satisfied.
I'm so glad I was able to find a site to download my missing manuals. Very reasonable prices and they kept me informed about the process and I had my manual within less than a day. The only thing I wish was an option is a 100% English version with no spanish or anything. But overall great site.
The manual is complete with excellent quality! One suggestion, show number of pages and weather it is multi-lingual. The AD 600 Manuel is about 76 pages and over half is non English. This results in a larger print job than usually needed. Having this information, one could select the desired pages for printing.
I've been looking for a copy of the original user/owner manual. Just what the doctor ordered, thank you.
Text excerpt from page 23 (click to view)
Adjusting the audio output level � AF OUT
Via the �AF OUT� menu, you can adjust the audio output level of the receiver. The level can be adjusted in eight steps. Adapt the level of the audio output (AF OUT) to the input of the connected unit. The following figures are a guide to the best settings: Line level input: 0 to + dB 18 Microphone level input: � to � dB 24 6
Adjusting the squelch threshold � SQELCH
The receiver is equipped with a squelch that can be adjusted via the �SQELCH� menu. The squelch eliminates annoying noise when the transmitter is switched off. It also suppresses sudden noise when there is no longer sufficient transmitter power received by the receiver. Note: Before adjusting the squelch threshold to a different setting, set the volume on a connected amplifier to the minimum. There are three possible squelch settings: LO MID HI = low = middle = high
Selecting the setting �LO� reduces the squelch threshold, selecting the setting �HI� increases the squelch threshold. Adjust the squelch threshold � with the transmitter switched off � to the lowest possible setting that suppresses hissing noise. Important notes: If the squelch threshold is adjusted too high, the transmission range will be reduced. Therefore, always adjust the squelch threshold to the lowest possible setting. When in the setting mode of the �SQELCH� menu, pressing the button (DOWN) for more than three seconds will switch the squelch off. �SQ.OFF� appears on the display. If no RF signal is being received, hissing noise will occur. This setting is for test purposes only.